Search models, users, collections, and posts
Xiaomi Mi Scooter 1S, 2 PRO, 3 - Wall mount
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 60% infill
Designer
13.1 h
3 plates
Open in Bambu Studio
Boost
85
278
11
1
131
51
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- Wall screw x 2: Up to 4 mm diameter. For flush installation, the head should be smaller than 8 mm, tapered.
- Wall anchor/plug x 2: Depends on installation location; high-quality anchors (e.g., Fischer) are recommended.
Description
In the tested scenario, the scooter stands on its front tire. Short-term testing proved that it is able to hold the scooter lifted. Printed in PETG with 60% infill and 0.2 mm layer height.
Compatible with:
- Mi Scooter 1S
- Mi Scooter 2 Pro
- Mi Scooter 3
- M365 Pro (use Mi Scooter 1S model)
Warning: Place some insulation (plastic or vinyl sticker) under the tires. A chemical reaction caused by the tires may result in yellowing of the wall or floor.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (11)