Portable medicine dispenser organizer

Description

This is a portable medicine dispenser organizer, with dimensions of (189*30*54mm), similar to the width of ordinary glasses, easy to open, close, and store, and requires no hardware accessories.

Features:

• No additional hardware accessories required for assembly.
• The print files have been optimized with supports for direct printing.
• Designed for twice-daily medication for seven days a week.
• The lid uses a snap-on design, with a clear click, and is effortless to open and close.
• Rounded shape that won't hurt your hands.
• Can be conveniently placed in a backpack or handbag for daily use.
• Sturdy and durable structure.

Actual size

189*30*54mm

Assembly

The organizer requires two 1.75mm printing filaments (PETG or other flexible filament is recommended), each 189mm long, for assembly.

Assembly Operation:
1. Insert the 189mm long filament into a small hole on one side of the main body from above.

2. After passing through the small hole, leave about 3mm of filament exposed and insert the corresponding lid into the filament.

3. Continue to thread the filament through the lid and into the next small hole, and so on, until all lids in a row are secured to the main body. (Do not close the lids during this process, as it will deform the filament and prevent it from passing through subsequent holes)

4. If the filament protrudes from the top left or right of the box body, it can be trimmed with a utility knife or softened with a lighter and pressed into the small hole.

Printing suggestions

It is recommended to use a skirt setting during printing to prevent warping.

Your boost is the greatest affirmation to me, thank you for your support.

Your support is the greatest affirmation to me, thank you for your support.