Stop / marking gauge for folding rule
Print Profile(1)
Bill of Materials
- M6 x 20mm Sechskantschraube x 1:
- M6 Sechskantmutter x 1:
Description
If you need to mark the same measurement multiple times with a tape measure,
you will be glad to have this stop
Because with this, you can mark with repeatable accuracy
Ideal for hobbies and work
Simple PLA is sufficient for printing, as there are no heavy loads acting on it
No brass insert or tap is needed!
Simply insert a nut!
On the second print plate, you will find the head of the clamping screw.
This hangs in the air, which is intentional
Please slice and print the part without making any changes to the settings
in the slicer
A support structure is built, on which the head of the clamping screw is then printed
The printer then pauses at a certain height
Now please place an M6 x 20 mm hex screw with the thread facing down into the tower
Make sure the screw head is flush!
Now the print can be continued
Now remove the support structure (hold the support structure and turn the clamping screw)
and the clamping screw is ready
I wish you much fun with this model
I'm just starting to publish my designs.
Therefore, I would be very happy about a Like or even a Boost.
Boost Me (for free)
I'm old and I need the money. :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (123)