Staus Bar 2.0 X1C / P1 Series

⚠️ Warning: Wiring and maintenance only by qualified personnel!
Wiring, installation, and maintenance may only be carried out by qualified personnel.
I assume no liability for damages,
arising from improper handling or unauthorized manipulations.
Status Bar Features
-    Freely configurable printer status display (Home Assistant or IO-Broker required for integration).
-    More flexible than the BIQU Panda status 😉
-    WLED & Bambu integration or adapter must be available
-    The status bar does not need to be glued, it is attached with magnets (SmCo or ferrite recommended – temperature-dependent with ASA prints (heated bed frame reaches up to 90 °C at a heated bed temperature of 100 °C)

Required materials:
-    D1 Mini with flashed WLED software
-    Cable power supply for D1 Mini Micro-USB or USB C, depending on D1 Mini version
-    5V power supply 3A or 5A
-    6x SmCo or ferrite magnets 8x5
-    1x XH-3R connector
-    1x XH-3P socket
-    Individual wires AWG 22
-    Optional braided sleeve
-    Cable ties
-    6x 2x5 self-tapping screws for plastic (Bambulab)
-    WS2812B LED strip reduced to 32 LEDs
-    1x M3x5 screw
 

I recommend printing with ASA.

Update 10/14/2025

I was informed that a component is missing in the print profiles (the frame to clamp the LED strip).

Both profiles have been updated!

Update 10/17/2025

WLED Presets added