Hueforge Ian McKellen & Patrick Stewart

Hi this is my first submitted project so I hope you like!

I have always loved this picture so was a natural first choice to use to test my new Hueforge license.

Project: McKellen Stewart.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Beige
    At layer #17 (1.48mm) swap to Jade White for the rest.