Kamui Sharingan Printhead/Extruder Cover/Panel for H2S
Print Profile(1)
Description
Initially, I couldn't find a suitable basic cover model for the H2S printer, so I decided to design one myself.
The extruder cover structure of the H2S is different from the A1; its installation requires an extension rod; otherwise, it cannot be installed smoothly. Considering the small size of the part, I set the print line width to 0.2mm to achieve finer pattern details.
Initially, I planned to print with the pattern facing down, but actual testing revealed that the 0.2mm line width prevented that surface from adhering firmly to the build plate. So I adjusted the print direction, switching to print with the pattern facing up, and added necessary support structures to ensure successful printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)