Genmitsu Cubiko Laser Module Gridfinity Bin

Gridfinity bin for your Genmitsu Cubiko Laser module, glasses, and cable.
 

Some design considerations: 

• There is a cut out on this model to allow you to drop this in without unplugging the cable from the back of the laser module. 
  • You can unplug it, but you don't necessarily HAVE to.
  • My theory is unplugging introduces 2 risks:
    1. risk of damage to the connector if I ham fist it repeatedly
    2. risk of losing the cable because if I don't put it where it belongs it will walk away
  • You can absolutely decide how valid my theories are for you. Have fun.
• 2 small brackets hold the laser safety glasses LENSES UP,  not lenses to the side. 
  • This is intentional so they are less likely to wiggle wiggle against other junk in your bin. 
    • those wiggles would increase risk of scratching when you are slamming your drawers around.
• Additional space next to glasses can be left blank OR used to hold the additional cables/hex-wrench that come in the laser module box.
  • Or you can put something else there if you want.
  • Or you can put nothing there if you want, but I am already judging you for it.
• 2 versions available
  • 1 color - yep. it works great
  • 2 color - Enhanced 1 color design now with one more color! make the letters POP

Thats uh… pretty much it for now. I intend to throw a couple more gridfinity bins together for some of the other Cubiko stuff, in particular the spare motor and drawing tool. I just need more time to finish modeling and printing them.

Let me know what else you would like to see for your cubiko. Maybe I would like to see it too!