Bed Level Test for X1C/P1S/P1P/A1 - Free 3D Print Model

Search models, users, collections, and posts

Quastra

3D Printer>Test Models

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

27 min

1 plate

4.9(377)

Open in Bambu Studio

Boost

205

490

405

4.7 k

3.3 k

Released

Description

Content has been automatically translated.

Show original

As Bambu Lab print beds are not always perfectly level, I quickly performed a first layer test that covers almost the entire print bed.

Please disable the flow calibration, as otherwise it will be used for printing.

Since the Bambu Lab print beds are not always straight, I quickly did a first layer test that covers almost the entire print bed.Please switch off the flow calibration, otherwise the calibration will be used to print.

bed level test drucktest

Comment & Rating (405)

@user_3573805273

Print Profile

0.2mm layer, 2 walls, 15% infill

I use it as my mousepad🤣

@Misterdreid

How did you fix it

Show original

@user_3573805273

Replying to @Misterdreid :

tightened the screws

@Misterdreid

Replying to @user_3573805273 :

from the nozzle ? the 2 screws at the back ? because I have the same problem

Show original

@user_4211425865

Print Profile

0.2mm layer, 2 walls, 15% infill

really bad result

@operation.remie

lol that's on you. no idea why you gave 1 star.

(Edited)

@ttyoo8126

your bed is not level thats why lol

(Edited)

@grzess888

thats your skill issue not model fault

(Edited)

@qingwen

Printed out well and looking good after doing the manual bed leveling with the paper method.

The designer has replied

@Quastra

Which printer do you have?

@Quastra

Replying to @Quastra :

I own, among other things, the Bambulab X1C

Show original

@nennyboy

The Printer definitely needs to be checked

@user_3207373355

Haha, I understand bro I have manual leveling🔫🔫🔫

Show original

@pims_se

Print Profile

0.2mm layer, 2 walls, 15% infill

Great bed )))

@Drachornsrule89

ran 3 calibration tests (forgot to turn off flow calibration for the last 2) but the issue seems to be pretty consistent. I will try a manual bed level and test again. any further advice?

@juanclazaro

Print Profile

0.2mm layer, 2 walls, 15% infill

Thanks a lot for this design. Could you help me understand the result I got?

@millagax

Your nozzle is too close to the bed. You have to adjust it.

@Quastra

Definitely, the nozzle is too close to the bed If it hasn't improved, I would recalibrate completely

Show original

@user_3905250482

my horrible I've been trying everything for 3 days and still nothing 😶 I've leveled manually and on the z and nothing

The designer has replied

Show original

@Quastra

The printer calibrates automatically when reinstalled. If new firmware has been installed, a full recalibration must be performed from the menu. Unfortunately, it is normal for some corners of the print bed to not be 100% straight. Good luck

Show original

@comotose

Print Profile

0.2mm layer, 2 walls, 15% infill

I still have a lot to learn about 3d printing but one thing I do know is that my bed is level. Thanks for sharing this simple but very useful print.

@wln.rds

Print Profile

0.2mm layer, 2 walls, 15% infill

After calibrating and cleaning the plate, then I needed it to do the final test, thank you.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.