Search models, users, collections, and posts
RP Classic flat back shell (regular and slim)
IP Report
Print Profile(1)
Regular Flat Back - 0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
35
86
14
7
127
57
Released
Description
A replacement back panel for the Retroid Pocket Classic that is flat! The triggers are now part of the shell, a little less movement in them.
You also need to swap out the little rubber inside the original shell triggers (see photos).
I've got 2 versions:
- The regular one works with the stock battery, flattens the back, and curves the edges. I do actually find it more comfortable
- The slim one requires swapping the battery to a smaller one. This requires soldering the stock battery pcb to the new battery, do at your own risk
- I used a 2200mAh 604368 lipo (6x43x68mm battery) https://www.amazon.com/dp/B0CNLNNL2D
- Battery life is certainly reduced, but I've found it fine.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)