Magnetic door catch for Euro-standard 3030 aluminum profile frames and 4-5mm thick acrylic frameless doors

Magnetic door catch for door fixation on 3030 aluminum profiles. [Theoretically, 4-5mm thick door panels, regardless of material, can be used normally]

Introduction: If you are making a printer enclosure or a small cabinet, but struggle with the door not being able to stay fixed, then this is a particularly good solution. You only need to fix a few magnetic door catches on the inner side of the 3030 aluminum profile frame, which will effectively attract and secure the enclosure door.

Additional items to purchase:

Diameter 18MM × Height 5MM Magnet *1

M6*14 Countersunk Screw *2

M6 Slider Nut for 3030 Aluminum Profile *2

Magnetic plate or pure iron sticker *1 (to be attached to the door, allowing the magnet to hold the door frame)

**The side is designed with a notch for magnet removal, allowing you to pry and push out the magnet with a small screwdriver for disassembly.

***Important Information 1: This magnetic door catch is used for fixing [frameless doors]. A frameless door is a pure acrylic door not wrapped with aluminum profiles on all sides.

****Important Information 2: This design is primarily adapted for 4-5mm thick acrylic doors, and the door must not have a frame (because the frame would exceed the thickness)