Design clock – Honeycomb style kit011

🔒 Important: Most of the models I offer are based on licenses belonging to their original creators. They are therefore intended for strictly personal and non-commercial use.

🍻 Want to use a model for commercial purposes?

I simply ask for a small gesture for the time invested in modeling:

💬 Buy me a virtual beer (€2.50 where I live!)

You can do it via PayPal right here ⬇️

🙏 Thank you for respecting the work, and for your support!

https://www.paypal.me/clairenteau

📝 Description:

Here is an original clock with a geometric honeycomb design, perfect for bringing a modern touch to your interior.
It is compatible with the BambuLab clock kit (kit-011) and can be 3D Printed in two colors for a contrasting result (e.g., black/red or black/white).

👉 Compatible with the kit-011 BambuLab

👉 Hands available here: Hands for BambuLab clock kit – kit-011 by lmcreation56 MakerWorld: Download Free 3D Models

👉 Wall mount available here: Clock holder – BambuLab kit-011 by lmcreation56 MakerWorld: Download Free 3D Models

👉 Possibility to customize colors according to your desires.

A creation simple to print and elegant once assembled, ideal for personalizing your decor. ✨

🛠️ Tips for perfect adhesion in 3D printing:

Carefully clean your build plate before each print. Grease residue, dust, or fingerprints can impair adhesion and cause detachment.

Check the build plate calibration: a well-leveled plate ensures a uniform and well-adhered first layer.

Use an appropriate adhesion surface: depending on your material, apply a thin layer of glue stick, an adhesive spray, or a specific tape (e.g., Kapton, BuildTak).

Set the build plate temperature correctly to promote adhesion depending on the material used (PLA, ABS, PETG, etc.).

Reduce the print speed of the first layer: a slower speed allows for better filament adhesion to the build plate.

Plan a «skirt» or a «brim» in your slicer to stabilize the first layer and limit warping.