WV Almost Heaven Swing

In my home state WV, they have started putting up these swings. They are called almost heaven swings. Most of them are in scenic spots all around the state and also in a lot of parks. They have become a picture taking destination. My wife after doing a photo session kind of gave me the inspiration, challenge, or idea, whichever you want to call it, to make a 3D printed one. After several test and little changes I have landed on this one as my favorite. All the piece fit together easily and depending on shrinkage, tolerances etc may require just a little super glue. For the print in the picture I used basic brown and then dry brushed some black to fill in the wood grain a little. Have fun printing it. Leave me pictures when you do. Thanks! If you want to sell it, join my membership on here, license last as long as you are a member. 

After Printing all the piece, most of this goes together very easily, 

The only part you may need help with is getting the swing string block into the swing support. I cut about a foot of twine. lay the middle in the little spacer block, glue the sides of the spacer block, careful not to get an on the string. insert the block into the crossmember of the swing support. The twine should stay being able to slide to even the swing. From there, insert the end through the swing seat and make a simple knot to hold.