Tazmanian Devil - Full

Tazmanian Devil, commonly referred to as Taz is from Warner Bros.' Looney Tunes and Merrie Melodies cartoons.

This model is the full body version of my original Tazmanian Devil model:

https://www.prusaprinters.org/prints/83451-tazmanian-devil

To make Taz with his full body, all the files and writeup notes from the original should be followed with the following exceptions:

1 - body_full_top replaces body
2 - body_full_bottom replaces whirlwind
3 - face_full replaces face
4 - base_full replaces base
5 - Extra part body_full_pin

6 - body_full is an optional part if you want to print the full body as one piece. This part is quite large and would require quite a bit of support.

Special note:
The body_full_bottom part requires slicer supports between the legs only (no supports are needed under the tail). The rest of the model does not require supports.

The assembled model is 230mm tall.

**Special shoutout/appreciation to maker Benoît Lussier for helping me with this model. He did all the test printing, a full build and provided pictures of the completed model.**

Enjoy!