Kermit the Frog - MMU

MMU version of Kermit the Frog, a Muppet character by Jim Henson.

Kermit serves as the straight man protagonist of numerous Muppet productions, most notably Sesame Street and The Muppet Show, as well as in other television series, films, specials, and public service announcements through the years.

In order to make this model fully support free, this is a two piece model (head, body). See important print instructions for a six color model!

The height of the assembled model is 60mm.

This MMU model was derived from my non-MMU model (reworked for a clean MMU print):

https://www.prusaprinters.org/prints/211-kermit

Enjoy, and don't forget to post your makes!

Print instructions

There are two 3MF files attached. One for just the head and one for the body.

The head contains five colors and the body contains two colors (with one repeat color from the head). If you print the head separately from the body you will get a six color print.

If you load both 3MF files and print the head and body at the same time, you need to decide which color will be duplicated. My wife suggests that the ruff must stay yellow, so the suggestion is to make the white part of the head (eyes) in yellow also.

I've also included all the STL files.

All the supplied files are for the smallest recommended size of the model. The model can be sized up without issue, but I would not recommend sizing it down any further.