AMS HT SIDE SHELF FOR X1C P1S P2S D3P RISER - Free 3D Print Model

Search models, users, collections, and posts

Darren 3d print

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

P1S

P2S

P1P

H2D

H2S

X1 Carbon

H2C

X2D

H2D Pro

X1E

A2L

AMT shelf with cutout - 2025-10-10

Designer

20.2 h

6 plates

4.9(29)

AMS-HT side shelf without cutout

Designer

21.6 h

6 plates

5.0(1)

Open in Bambu Studio

Boost

159

563

546

265

Released

Description

NEW

2025-11-10 Revised the side brackets. The internal part of the hook for the riser is now thinner so as to not interfere with the lid.

2025-10-10I added a revised tray model with a center cutout to allow venting of heated air.

Also, after receiving testing feedback it may be preferable to print the side brackets in PETG.

MODEL

This model is for an AMS HT side shelf for use with the X1C D3P riser, the P1S D3P riser and the P2S D3P riser. The shelf will also work with most other filament dryers for single spools however I have not tested them.

X1C D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-x1c

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-x1c?source=22

P1S D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-p1s

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-p1s?source=22

P2S D3P riser Link: https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-p2s

Alternate: https://www.crealitycloud.com/model-detail/d3p-riser-bambu-lab-p2s?source=22

A left and a right side model is provided.

3D PRINTING

PRINT SETTINGS

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PETG is recommend for the side brackets and tray if using the dryer.

Comment & Rating (66)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.