AMS and AMS HT shelf for H2D H2S H2C D3P riser

NEW: 2026-6-24 Added a print setting and shelves with a cutout for use with the FTS - The print profile has the mention “for FTS cutout”

NEW: This also works for the new H2C

THIS IS NOT A MODEL FOR A RISER BUT ADDONS FOR THE D3P RISER - SEE BELOW FOR MORE INFORMATION ON THE D3P RISER FOR THE H2 SERIES. THANK YOU

DUAL AMS 1 OR 2 AND 1X AMS HT

The shelves are for use with the H2D - H2S - H2C D3P Riser. They allow the H2D - H2S - H2C D3P Riser to hold two AMS 1 or AMS 2 units AND one AMS-HT unit in the middle.  The shelves are removable and include pins to lock them into place.

Click on link to find out more about the H2D - H2S - H2C D3P Riser

H2D - H2S - H2C D3P riser Link: https://cults3d.com/en/3d-model/tool/bambu-h2d-h2s-d3p-riser

Alternate: https://www.crealitycloud.com/model-detail/bambu-h2d-h2s-d3p-riser?source=22

IF you do not need the AMS-HT unit in the middle then you can download my other model for dual AMS 1 or 2 extension shelves.  Link

3D PRINTING

PRINT SETTINGS

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PETG is recommended. PLA will work providing you do not rest a dryer on the shelf or print high temp filament such as ABS and ASA. PLA may deform due to the heat of the dryer or due to heat of printing high temp filaments.  If you only will print PLA or PETG and will not use a dryer then PLA will work.