Print Profile(1)
Bill of Materials
- Magnetplätchen x 1: https://www.amazon.de/dp/B0C56YC8X1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Description
• Kevin's 3D Print Profiles
• Print Settings for PETG & PLA
• Fine-tuning for perfect prints
• My Makerworld Print Setups
Boost Me (for free)
This expressive little bear was printed in PLA on the Bambu Lab A1 and carefully hand-painted. To hold magnetic signs, a neodymium magnet like this one was glued inside its belly. The signs themselves contain magnetic sheets like these, allowing them to stick to metal surfaces like fridges or whiteboards.
Since the magnet is placed in the belly, the bear must be printed lying on its back, which requires full-body supports, especially for the head, arms, and legs.
There are eight different signs available in the print profiles, each expressing a different mood – from “cold!!” to “annoyed” or “not now”. The bear becomes a perfect mood messenger for your daily life.
Print Profile:
• Material: PLA
• Printer: Bambu Lab A1
• Layer Height: 0.16 mm recommended
• Supports: Yes, full-body due to back-facing print
• Magnet: Ø8 mm x 3 mm neodymium, inside belly
• Painting: Acrylic + clear coat
• Signs: approx. 40 x 20 mm, backed with magnetic film
Boost Me (for free)
"This profile has been tested multiple times. For best results: a clean bed, good filament, and a little patience."
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)