Run the jewels 2 - Album Cover - Hueforge

Project: run the jewels 2.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 149.69x149.69mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm

The Max allowed Thickness is 2.52mm and the Actual Thickness is 1.44mm

Filaments Used:

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4.2

#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.1

#00ffd2 PLA BambuLab Basic Torquise Transmission Distance: 1.2

#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.4

#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4

This print uses 5 unique filaments

Swap Instructions:

Start with Red

At layer #8 (0.48mm) swap to Charcoal

At layer #10 (0.56mm) swap to Torquise

At layer #13 (0.68mm) swap to Ivory White

At layer #22 (1.04mm) swap to Sunflower Yellow for the rest.