Garage Tinkering gauge board holder for LCD gauges
Print Profile(1)
Description
This is a simple holder for the Garage Tinkering LCD and ESP32 gauge board and 2.1" screen…
Links:
https://www.garagetinkering.com/
https://www.youtube.com/@GarageTinkering
These are ESP32 based boards designed to let you build custom gauges for your car…
Hardware wise its just 2x M3x8mm bolts (+nuts) or you can use the ‘Fixing Peg’ stl to locate the two halves and glue them together if you prefer
To fit the screen and board assembly into the holder you slide the screen under the tab on the top
then slide the board into the lower half locating one side under its tab then gently pulling the other side of the lower mount to allow the other side of the board to locate under its tab…
And there you have it…
I added a a USB-C cable holder on the side to act as a bit of strain relief and to keep the cable from pulling the holder over or getting in the way
Boost Me (for free)
If you really like this print please feel free to boost me... thanks :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)