Mandalorian - Hueforge - Free 3D Print Model

Search models, users, collections, and posts

3D_Rey

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1P

X1 Carbon

H2D

H2D Pro

X1E

H2S

P1S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

4.5 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Stormtrooper Thumbs Up - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 130x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.99mm

Filaments Used:
    PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
    PLA BambuLab Basic Green Transmission Distance: 2
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Desert Tan Transmission Distance: 1
This print uses 6 unique filaments

Swap Instructions:
    Start with Cocoa Brown
    At layer #5 (0.48mm) swap to Green
    At layer #8 (0.72mm) swap to Black
    At layer #10 (0.88mm) swap to Red
    At layer #12 (1.04mm) swap to Cocoa Brown
    At layer #14 (1.2mm) swap to Jade White
    At layer #21 (1.76mm) swap to Desert Tan for the rest.

Hope you enjoy! Thank you!

Also don't forget to post pictures after you printed this Hueforge :)

Comment & Rating (6)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.