DeWalt / Kreg Track Saw Slide
Print Profile(1)
Bill of Materials
- 10-24 x 1/2 set screw x 1: https://www.amazon.com/gp/product/B0CY92YGKF/ref=ox_sc_saved_title_3?smid=A1HMN9CDMC3TAC&th=1
- 10-24 tap x 1: https://www.amazon.com/Bosch-BPT1024-10-24-High-Carbon-Machine/dp/B07GRP82T9/ref=sr_1_5?crid=37IVKFD6DGL1G&dib=eyJ2IjoiMSJ9.e5I-0wcG3hgL10QZ3fQKSYfUscgSPaCBa2By_JLT_geiQ6GrfofZ8CEgq4XkQ4-6FmDyR2x5Ru-8cDauilXbczZx4adP0N_2IelEhpHNSunLYvVwezRKpvXGHIlEJA1h6q5iWTUdJAl0KC1yVzVRVGOvhj2sX3ziXDcQB1ip7kzm-YUl1h9vgfVUoJxLTV0qlwbeWciGOQgzrHjz33ujANXAEQ93Dw5ww2ortC7p8K0.AbPkfl6aqLuPU7BPMJ7HoXUnAeoVlIslBq2mVClEbOY&dib_tag=se&keywords=10-24%2Btap&qid=1757524314&sprefix=10-24%2Btap%2Caps%2C230&sr=8-5&th=1
Description
Just a regular guy designing prints for the masses.
Hey Everyone!
So I've had a few people ask about the track saw guide i designed awhile back. I have decided to post it again. It is set up to work with the DeWalt DCS 565 6 ½ 20 volt circular saw and the Kreg ACS 62 in guide. I'm not sure of other fitments so you may have to do a little research for compatibility if your saw is different. I spent a little extra time with R&D and can say the blade lines up perfectly with the guide edge. I have used mine on several occasions with great results!
The seams were set to random in the photo, I have corrected that issue and it prints smooth now
Warning: the guard is held open exposing the blade, use caution when cutting.
Dimensions:
7in W x 12 in L x 1 in H (yes it will print on a 250mm bed)
Print Specifications:
PLA
0.4mm nozzle
0.2 mm layer height
3 wall loops
15% infill
support where needed
brims
Supplies:
10-24 X ½ Set Screw
Amazon Link:
https://www.amazon.com/gp/product/B0CY92YGKF/ref=ox_sc_saved_title_3?smid=A1HMN9CDMC3TAC&th=1
10-24 Tap
Amazon Link:
Notes:
The hole for the set screw needs to be threaded. I put just a tiny amount of blue Loctite for good measure.
Boost Me (for free)
If you enjoy my models, please consider following me, leaving a comment, like, and Boost!
Link to my models:
https://makerworld.com/en/@Little_Eddy_M/upload
Instagram link:
https://www.instagram.com/lem_little_eddy_m?igsh=MWl3NHloOTBiaHY3OQ%3D%3D&utm_source=qr
YouTube:
https://www.youtube.com/@LittleEddyM
DISCLAIMER:
I design models for fun, the files are posted for “PERSONAL USE ONLY” and are provided ”AS - IS" without warranty of safety or functionality. CAUTION!! some models have small parts, pieces could break off or come loose causing a choking hazard, always use extra care monitoring your children when playing with them.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)