Misery Hueforge Bookmark
Print Profile(1)
Description
Misery Hueforge Bookmark
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 51.16x133mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #9 (0.8mm) swap to BambuLab Basic Blue
At layer #11 (0.96mm) swap to BambuLab Basic Red
At layer #12 (1.04mm) swap to BambuLab Basic Beige for the rest.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)