Print Profile(2)
Description
Wrap the reindeer with any string of lights and let it shine. Designed to print as quickly as possible with minimal support, so the print may have imperfections, but for a garden decoration that I won't examine up close, it's fine.
- Size is roughly cca 500mm
- I used white PLA, but the colors are up to you.
- Printed with 0.4 nozzle
- A well-degreased and calibrated bed is necessary for successful printing.
- If a string appears, just carefully burn it with a lighter, Cut larger strings with a knife.
- Be careful, if you do not print 3mf, the holes for the pins will not be created.
- Due to the construction, the supports are difficult to remove, unfortunately I cannot influence this, I tried to put as few supports as possible.
Boost Me (for free)
if you liked my work support me for free! just click here! Thank you very much :)
Check out my other designs on my profile.
Membership
If you are interested in selling physical copies of my designs in your local or online store, or just want to support my work, go to:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)