Neo Geo MVS Cartridge Shell for BackBit Platinum

This is a remix of the Neo Geo MVS Cartridge Shell specifically for the outstanding BackBit Platinum Cartridge for Neo Geo MVS.  This will allow you to create your own custom cartridge shell for your BackBit Platinum cart in any color or material you choose.

The cutouts were measured with digital calipers for accuracy to ensure ease of aligning and installing the BackBit Platinum mainboard.  Being said, the .3mf file uses negative parts to create the required cutouts for the BackBit Platinum mainboard, and as such are easily modified if you want to tweak the cutout sizes or locations.

The model is a “no-support” model, so you should not have to use supports to successfully print. Test prints were done on a Bambu Lab P1S with a Textured PEI Plate using PETG-HF filament and liquid 3D printing adhesive. One test print was done in a black shell with white accents, and one in a white shell with black accents. 

The prints came out very well with minimal stringing and minimal post-processing required (e.g. I did have to snip off a 2 strands under the unsupported bridge of the microSD Card slot, but no other post-processing was required in my personal testing).  Your mileage may vary depending on the specific material you use, but it should print, clean-up, and assemble without too much difficulty.

Just like the original, 4x M3x30 screws and 4x M3 nuts are required for assembly.

Thanks to the original authors of the Neo Geo MVS Cartridge Shell model, and Evie at BackBit for creating the BackBit Platinum cart.