UCONN Huskey HueForge

AI generated image that was turned into a huge forge. Do not adjust the Z height. Sizes is 200*200

Project: Huskey.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 1.12mm

The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

Filaments Used:

#1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Dark Blue

At layer #19 (1.6mm) swap to Red

At layer #24 (2mm) swap to Ash Gray

At layer #36 (2.96mm) swap to Jade White for the rest.