NY Yanks Hueforge 200*200 - Free 3D Print Model

Search models, users, collections, and posts

user_3269200842

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

H2D

P1P

H2D Pro

X1E

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

7.6 h

1 plate

3.0(2)

Open in Bambu Studio

Boost

Released

Description

AI generated image that was turned into a hueforge. Size is 200*200. Do not adjust Z height.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 201.37x200mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 3.12mm and the Actual Thickness is 2.88mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue Transmission Distance: 4
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    #e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Blue
    At layer #19 (1.6mm) swap to Blue Gray
    At layer #20 (1.68mm) swap to Red
    At layer #26 (2.16mm) swap to Ash Gray
    At layer #29 (2.4mm) swap to White for the rest.