Radar LD2410C - Presence Sensor Esp32 LD2410C
Print Profile(1)
Bill of Materials
- Brass Heat-Insert M3 x 2: 4x4 mm
Description
Presence Sensor for ESP32 (30 pin) – LD2410C
The case houses a 30-pin ESP32 dev board, features magnetic closure with 6x3 mm magnets and M3 screws to orient the base and bracket. It has internal provision for an AHT10 temperature/humidity sensor (optional).
Features
- ESP32 30-pin (DevKit V1 type format): with ample space for cable glands.
- Mounting
- 4 * 6x3 mm Magnets (press-fit sockets; glue recommended).
- 2 - M3 Screws with 2 M3 inserts (heat-set) for the bracket.
- AHT10 Provision (optional): ventilation hole near the sensor to improve measurement.
- Magnetic Head: Magnetic head opening
- Sensor Head: LD2410C snap-fit
Bill of Materials (BOM)
- 1× ESP32 30-pin (DevKit V1 or equivalent)
- 1x LD2410C Sensor
- 4× Neodymium Magnets ⌀6×3 mm
- 2× M3 Screws L = 23 mm (for lid closure)
- 2× M3 Threaded Inserts
- (Optional) 1× AHT10 on breakout board + Dupont wires
Magnet note: check the polarity before gluing them; orient them identically between base and lid for correct attraction.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)