OneBlade WallDock – Wall Mount for Your Shaver

✨ OneBlade WallDock – Wall Mount for Your Shaver ✨

Tired of seeing your shaver dancing all over the bathroom counter? 🪞
With this wall dock, your Philips OneBlade will always stay organized, secure, and ready to use.

🔹 Practical design: place and remove the shaver in seconds.
🔹 Charge without hassle: the cable connects easily while it’s on the dock.
🔹 Flexible mounting: use the two screw holes or apply extra-strong double-sided tape (make sure it’s moisture-resistant for bathroom use).
🔹 Modern & discreet style: a clean, futuristic design that adds an elegant touch to your bathroom without being too flashy.

⚙️ Printing Recommendations (tested on Bambu Lab P1S):

• PETG-CF (recommended) → enclosure closed, nozzle 250–260 °C, bed 80 °C, fan max 30%, 3 perimeters, 20–25% infill.
• PETG (regular) → enclosure door slightly open, nozzle 240–250 °C, bed 75–80 °C, fan 40–100%, 3 perimeters, 20% infill.
• PLA → enclosure open, nozzle 200–210 °C, bed 60 °C, fan 100%, 3 perimeters, 15–20% infill.

🔧 Extra tips for overhangs & bridges (P1S experience):

• Max fan speed: raise up to 100% for PETG/PLA to improve long bridges.
• Overhang cooling: set fan at 100% for better results (PETG Glow especially benefits from this).
• Minimum print speed: lower to 15 mm/s on small features to avoid overheating.

💡 With these settings, you’ll avoid sagging on overhangs and get cleaner results on bridges.

A functional accessory with a minimalist character that makes your space more organized and sophisticated. 🚀