Ford Late Model V8 Oil Funnel (7.3, 6.8, and 5.0)

This is a remix of what was originally intended as a Ford Coyote oil fill funnel. I remixed the design so the funnel is clocked in the correct direction for the Ford 7.3 liter gasoline engine with the oil fill on the driver's side valve cover. I also increased the funnel opening to 100mm from the original's smaller design.

I designed this specifically for my Ford 7.3l gasoline (Godzilla) engine. Feedback indicates that it also works for the 6.8l and some 5.0l engines. As far as model years, I do not know what years it may work on those engines and what years it may not. I appreciate the comments if you print and confirm that it works for other engine applications so I can add it to the description. Feedback seems to indicate that it does not work well for earlier model 5.0l engines at least in the F150.

I printed using PETG which is resistant to most hydrocarbon products. No supports were required for my X1C or H2D printers. Make sure your PETG has been properly dried. Especially those using PETG-HF which is even more prone to moisture issues.

The funnel fits the valve cover oil fill opening fairly snugly so it stays in place during use. An o-ring is not required but a groove is incorporated in the model to accommodate one.