Battleship Bismarck HueForge Artwork

Hueforge Config:

Project: Bismarck02.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 245x198.3mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Jessie Premium Soul Black Glitter Transmission Distance: 0.5
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Grey Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Soul Black Glitter
    At layer #20 (1.68mm) swap to Blue Gray
    At layer #27 (2.24mm) swap to Grey
    At layer #30 (2.48mm) swap to White for the rest.