Millennium Falcon Wall Mount (bricks)

I have several Millennium Falcon L3GO kits that I hang on the wall (now basement dungeon).

For the Dark Falcon I decided to model a 3D print.  Originally, I made L3GO based wall mounts.  

The model screws into a wall or other horizontal plane.  The landing gear of the Millennium Falcon then sit into the slots on the print.  It does take about 3 or 4 hands to get the landing gear lined up.   

As you can see in the picture this will work with either the front or rear landing gear - you may need to make slight mods to the landing gear to get the legs to fit in the slots.  This was first done with set 75105 and works fine.   For other sets you will need to modify the landing gear to fit the gap and ensure the support is strong enough.  I believe the Dark Falcon had a completely different shaped landing gear.  The feet point forward, rather than to the side.  I believe I had to rebuilt those from the ground up to match the gear on 75105.

I hope this helps.