Tetro17

cover

IMG_20250908_162845.jpg

IMG_20250908_162925.jpg

IMG_20250908_163048.jpg

IMG_20250908_163055.jpg

plate_1.png

2025-09-08_316e135e8d47b8.jpg

0.2mm layer, 2 walls, 15% infill

Tactical Printing

IMG_4030.jpeg

IMG_4029.jpeg

ASA Print profile for Bambulab P1S mine with Panda Breath.Will work without Panda Breath but heat soak your P1S till about 40/45C for best results and use liquid glue or vision miner on the buildplate for best adhesion. Normally will work without it but i always use it on ASA, ABS, PA,…Ik clicks firm on the rods.

(ASA) 100,5% 0.2mm layer, 4 walls, 20% Gyroid, Speed Adjust

COPRI POLVERE SUPER Questi copri polvere per le stampanti P1P- P1S- X1C sono state create dal principio per essere elaborate millimetricamente perfette.<ol><li>Non ruotano quando la macchina e in funzione</li><li>Non si staccano anche se mettete sottosopra la stampante ^^</li><li>Quando le inserite sentirete un clap di aggancio leggere senza troppa pressione.</li></ol>&nbsp;Buon divertimento!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Vi chiedo gentilmente di supportarmi! Grazie in anticipo. </boostcontent></boostme>

SUPER DUST COVERS These dust covers for P1P, P1S, and X1C printers were created from scratch to be dimensionally perfect<ol><li>They do not rotate when the machine is running</li><li>They do not detach even if you turn the printer upside down ^^</li><li>When you insert them, you will hear a light click without much pressure</li></ol>&nbsp;Enjoy<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I kindly ask you to support me! Thanks in advance. </boostcontent></boostme>

Perfect Dust Cover - P1S - P1P - X1

ASIA

Print Profile(2)

Description

Comment & Rating (43)

License

Related Models