TUTANKHAMUN | 34 step puzzlebox (SPIN-OFF SERIES)

"Here lies the path where shadows sing,

Hidden treasures wait for only a King.

Sand veils the truth in endless night,

Whisper the secret, and find the light." 

Disclaimer:

This is part of my Himitsu Bako 2 | Spin-off series. That means the puzzle is the same as Himitsu Bako 2, only with different themes!

The first of the the HIMITSU BAKO 2 | OFFICIAL SPIN-OFF SERIES!

Step into the enigma of The Tutankhamun Edition — the first in the legendary spin-off of the Himitsu Bako 2. Adorned with carved hieroglyphs and figures from the ancient sands, this intricate puzzle box demands 34 precise shifts and hidden movements before its secret is revealed. Each motion echoes with the riddle of forgotten Pharaohs, each panel conceals the weight of eternity.

Only those deemed worthy — only a King — may unlock its heart. Dare you awaken what lies within?

-

Do you like my puzzles? Please consider a (small) donation. Every contribution helps me keep experimenting, designing, and releasing new puzzles for everyone to enjoy at no cost. Thank you so much.

You can also:

Attention:
This model contains moving parts and relies on tight tolerances. It is strongly recommended to print using a relatively new or well-maintained nozzle. Worn or heavily used nozzles may result in inaccurate prints, which can cause parts to fuse together or fail to meet the required tolerances. This may prevent components from moving correctly or cause them to become stuck.

Compatibily & Information

• NO AMS NEEDED! 
• NO ADDITIONAL PARTS NEEDED!
• NO GLUE NEEDED!
• A1 MINI COMPATIBLE - Even for Multi Color (exept for AMS printprofile)
• Dimensions (outer) 150 x 150 x 95 mm
• Dimensions (inner) 120 x 110 x75 mm
  • Enough room to store valuables  :)

Print instructions

• BAMBULAB Filament is highly recommended!
  • Other brands like Elegoo give very bad results in tolerances (which causes fitting issues!)
• Choose you print profile
  • Normal (Tight) fit or Loose Fit (in case of tolerance issues)
    • Multi Color without AMS (with baked in pauses to change filament)
    • AMS (Not A1 Mini Compatible, because of prime towers)
    • Attention! BOX IS SAME IN BOTH PROFILES! 
      • The rails of the panels are different (so only reprint the panels if you need to)
• Just press print!

Assembly instructions

• Follow the detailed Parts & Assembly document I included with this model
• No Glue or Additional parts needed!

Solution

• Because this box is pretty hard with 34 steps to open, I included a separate SOLUTION document. 
• BE ADVISED! Dont open if you do want to figure out this puzzlebox by yourself!

PS. Have you checked out the PREQUAL of this puzzlebox yet? If you think 34 steps is a bit too much for you, HIMITSO BAKO (the first) has ‘only’ 17 steps to solve. 

If you don't like this theme, you can try the official Himitsu Bako 2 with ornate Japanese Patterns.