Search models, users, collections, and posts
anatomical lung
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
Open in Bambu Studio
Boost
468
1250
22
13
649
254
Released
Description
Content has been automatically translated.
Due to its intricate structures and detailed representation, the model is particularly well-suited to illustrate the complexity of the human respiratory system.
print possible with and without multicolor
Print parameters (tested on Bambu Lab P1S):
Boost Me (for free)
- Nozzle: 0.4 mm standard nozzle
- Filament: PLA Matte white (Bambu Lab)
- Layer resolution: 0.2 mm recommended
- Print time: approx. 45 minutes (single color, simple version) to approx. 4 hours (multicolor with color gradient via AMS)
- Support structures: definitely enable – otherwise, the delicate branches are prone to stringing and instability
- Speed: slower print provides better details
- Cooling: high fan power recommended for clean edges
you might like this too!
Tips & Notes:
- For a particularly realistic result, a color gradient (e.g., from light to dark) or the use of transparent filaments is recommended.
- To avoid stringing, optimize the Retract settings in the slicer and ensure clean nozzle calibration.
- The support structures are relatively easy to remove; it's best to use fine pliers or tweezers to avoid damaging the small branches.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)