Desktop Speaker Stand for Kanto YU/YU4/YU6

I 3D modelled a simple desktop speaker stand. The design inspiration is heavily influenced by the AudioEngine DS2 Desktop Stand.

The dimensions of the base are 125 mm x 180 mm, and it is angled at 15 degrees. Adding an angle to your desk speaker should significantly enhance your audio experience, as having your speaker at an angle where it will reach your ears is a better experience, as most speakers are very directional. 

This desktop stand should be able to accommodate your typical-sized bookshelf speakers. I modeled this with Kanto Yu speakers , so if your speaker is the same size (or a little larger) (e.g. AudioEngine A5+/HD3/HD4/HD5, Edifier Bookshelfs, etc.), this should be able to fit it. A smaller speaker like Kanto Ora will not fit in my current design. I also take into consideration the strength of the 3D print so this should be durable enough to handle heavier speakers.

I have provided the stl and 3mf so you can modify it based on your speaker requirements. My ask is for you to upload it here so that people can also use your design :)

BTW it may be very helpful to put some rubber feet at the bottom to avoid excess vibration in your desk. While I don't have issue with mine having no rubber feet, it is generally better to have some kind of speaker isolation (via rubber feet) to enhance your audio experience.