RC fixed landing gear
Print Profile(1)
Description
INTRODUCTION
I needed a landing gear for my acrobatic model airplane and decided to 3D print something lightweight and functional
FEATURES
The landing gear is 75mm high (excluding wheel diameter) and 150mm wide The total weight, including the necessary screws (m2 and m3) for assembly, is around 30g
ASSEMBLY INSTRUCTIONS
1- Cut a trapezoid into the fuselage with the indicated dimensions
2- Using glue, attach the landing gear support (the part with the same shape and a central hole)
3- Attach the landing gear to the support using m2 screws and nuts
4- Insert the screws that will serve as the axle for the wheels into the appropriate holes
5- Secure the wheels with self-locking nuts
MATERIALS
It is recommended to print everything with PETG for greater mechanical resistance, but PLA is also optimal
NOTES
The model has already successfully passed the flight test and from the attempts made, it is recommended to launch your model aircraft from asphalt or a flat and smooth surface
The landing gear was designed for 6mm Depron models
Recommended model aircraft weight below 500g
The hole in the landing gear support was designed to reduce weight and allow for the passage of any wiring
Boost Me (for free)
If you are interested in this type of content, consider supporting me by leaving a BOOST
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)