Knitting Needle Box
Print Profile(4)
Description
Boost Me (for free)
If you like the model, please leave a Boost here.
It's done, the Version 2 is online
Please do not print this version anymore The lids are very difficult to close
Please use Version 2
You can find more of my handicraft models here: Handicraft
My wife was looking for a practical, pretty, and above all, clear solution to neatly store her knitting needles (double-pointed needles) Since we couldn't find anything suitable online, we quickly designed something ourselves – especially for everyone who no longer wants their needles flying loosely in bags, tins, or project pouches
The result is handy boxes that can hold knitting needles with a maximum length of up to 230 mm and diameters between 1.5 and 10 mm This provides stable, well-protected, and visually appealing storage for the most common needle sizes The boxes are suitable for both home use and for taking along in a project bag or handbag
When printing, note that the height and width of the boxes vary depending on the needle size This way, each needle size gets its perfectly fitting box
You can customize the lid text directly in the slicer according to your wishes – for example, with your name or a short saying This transforms a simple box into your very own personal knitting accessory in no time
Available Sizes
1.5mm / 1.75mm / 2.0mm / 2.25mm / 2.5mm / 2.75mm / 3.0mm / 3.25mm / 3.5mm / 3.75mm / 4.0mm / 4.5mm / 5.0mm
5.5mm / 6.0mm / 6.5mm / 7.0 mm / 7.5mm / 8mm / 9mm / 10mm
Please let me know if your size is not included
Change / Addition:
22.11.2025
Boxes for needle sizes 6.0mm / 6.5mm / 7.0mm / 7.5mm added
25.11.2025
Boxes for needle sizes 1.5mm / 1.75mm / 2.25mm / 2.75mm / 3.25mm / 3.75mm added
21.12.2025
Boxes for needle sizes 8mm / 9mm / 10mm added
A print profile with boxes of triple height added This allows 3 sets of the same needles to be stored in one box
25.12.2025
User Foxden pointed out an incorrect assignment for the lids of the 4mm box
I have corrected this error in both variants
31.12.2025
There are now separate print profiles for the A1 and A1 mini, as these have a small print plate and cannot handle the original file
Like this 3D model?
☕ Show your appreciation by buying me a coffee!
👍 Share my creation and leave a comment below with any feedback or suggestions!
Note
All links with "*" are Amazon affiliate links. You are supporting my work at no extra cost to you.
All devices were purchased and paid for by myself.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (58)