RAF Tornado Sunset Hueforge
Print Profile(1)
Description
Project: Tornado.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 175x115.19mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.92mm
Filaments Used:
PLA Black Transmission Distance: 3.6
PLA Red Transmission Distance: 4.5
PLA Orange Transmission Distance: 5.6
PLA Yellow Transmission Distance: 6.2
PLA White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)