RV Outdoor Shower Head Holder
Print Profile(1)
Description
This shower holder belongs to a collection of modular camping gadgets.
The system consists of a base holder with an embedded M6 or M4 nut. A magnet or suction cup can be attached to it. This base holder is then simply locked into all modules with a bayonet lock.
To print the base holder, a pause is made after the last layer of the recess to insert the lock nuts, after which the nut is printed into the component.
The holder is designed for the Reich outdoor shower, which is installed ex works in most motorhomes, but probably also fits other shower heads.
For mounting, 1 M6x40mm cylinder head screw and an M6 nut (NO lock nut) are required. For reasons of stability, it is recommended to print from PETG or better.
If the supplied print profile is not used, please note the following:
2 pauses must be planned to insert the metal parts, each in the layer before the nut and screw are covered. The lower body of the screw must be printed with 1 wall, 0 infill and 0 top layers so that the screw fits in.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)