Megane 3 Radio CD Player Face Plate
Print Profile(4)
Description
If like me you installed a android head unit in your Megane 3 and had to remove the radio CD player, i made a simple face plate with or without the Renault logo.
There is two variation, one is flat printed upside down to have a clean surface with no print marks.
Second one follow the same curve of the original radio CD player, but it might require a very fine layer height or a lot of sanding to have a smooth finish. As you can see on the picture i started to sand the surface but i ended up going with the flat version of this model with the logo.
It is a really tight fit, so you'll have to wiggle it a little bit but it'll snap in and won't move
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)