Flament Swatch With Transparency Check, No Text

This filament swatch sample card is based on this Filament Swatch System by Mark'sMakerSpace. I liked the design especially the part where I can put a 40mm x 30mm label, but I find the thickness label for the transparency check unnecessary, so I removed that part. This model's design is largely the same, except with the thickness label (0.1, 0.2, 0.4, 0.6, 0.8) removed.

The dimension of the sample card is 73.2mm x 36mm x 2mm and uses just 5g of filament. The width and depth is the same as Filament Swatch System, so most of the other accessories designed to work with Filament Swatch System (especially the vertical holders) still work fine. The length is a bit shorter though, so keep that in mind.

The box is designed using this customizable Ultimate Sample Box. Just enter the sample card's dimensions above in the customization.

How I use it is the same as Filament Swatch System, you can check it out there including how the 40mm x 30mm label is obtained.