Print Profile(1)
Description
Self Watering Pot
Consists of 2 parts. Tray and the pot itself.
Ive added a gap to see the inside water level or to water the plant.
Boost Me (for free)
Click here to support my work; it costs you nothing and helps me sustain my creative ideas!
Print guide:
Kinda simple print. Supports needed for the bottom part. Use the provided print profile.
Make sure your printer is well calibrated.
You can switch to 0.12mm or 0.16mm layer height for more strength between layers.
This pot is completely water tight and tested by me.
Assembly guide:
Put the top part on the bottom part. Make sure to place it inside the gap, so the pot wont rotate.
I recommend mixing some sand into the dirt (around 20%) to concentrate the overall moisture.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)