FF7 Cloud Buster Sword 1:1 COSPLAY Prop Open Source part2
Print Profile(1)
Description
The platform cannot upload files larger than 200MB, so this file is part 2
Prop: FF7RE Buster Sword
Dimensions: Total length approximately 1.85 meters
Ratio: 1:1
The model was completed at the end of last year. I personally repaired and disassembled the parts, and the overall shape and surface details are highly restored
Printing Notes:
1. Please adjust layer height, infill, and other print profile according to your needs. 0.12mm offers better detail
2. It is recommended to print the sword tip with TPU, otherwise it breaks very easily
3. It is not recommended to print a large number of sword body parts together on one plate, to avoid excessively long printing times, heat-induced layer shifts, and other issues
Model Notes:
1. The hilt requires you to purchase a 22mm outer diameter, 40cm long steel pipe to embed within it
2. You need to assemble, glue, and plastic weld it yourself
3. You need to sand and paint it yourself
4. The small holes in the middle of each part are 5mm in diameter and 10cm long. You can consider using steel pipes of the same size for insertion and fixing, but this will significantly increase the weight of the sword body
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)