Xtra-Large V3 Sealed + Magnetic Poop Chute Cover

Due to popular demand, I have decided to make a larger version of my now famous sealed + magnetic poop chute cover design. If you are interested in the smaller versions, click on the images below:

As with the previous two designs, this poop chute cover was made to solve a very simple problem, nasty printing odour whilst printing. Based on the V2 version which has an extra compartment to store additional waste, the Xtra-large version holds up to ~18 single colour prints/multicolor purges, up from the ~12 previously. The former large version is good for those looking for a super slim sealed poop chute cover, whereas this Xtra-large rendition is perfect for those willing to have something a little bit larger. 

The design consists of two parts, one rigid plate with a ‘chute guide’ where the magnets are embedded into and another TPU seal. Five triangular features lock the TPU seal into place, ensuring an even and reliable seal against the back panel of your P1P/P1S/X1C. 

10x cylindrical magnets are required to complete the design, they are 4mm in diameter and 2mm in depth. These are the exact same magnets used in the BentoBox v2.0 design, making use of any spares laying around. Once the magnets and TPU seal are in the rigid plate, all you have to do next is to place it right at the exit of the poop chute. The cover should fit against the chute snugly.

I hope that you enjoy this design, and find it useful. If you love it, do consider giving me a Boost - thank you very much. 

Cheers,

K.