Meverickz

The door went missing on one of my daughter's expeditions.  I needed to add a raft to the print so the door stayed in place on the build plate.  

item fits well and is a great use for the 3d printer!

user_1866435191

aldair

Used a .4mm nozzle with 0 issue. Great print, thanks!

sinister

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

FLoD

Printed perfectly for me with PLA. thankyou sm!!!

Ruthy

I can not get this thing to stay on the damn plate was trying petg. I’m switching to pla. I even added adhesive 

user_647489497

il prodotto é funzionale, fa il suo dovere. esteticamente però la superficie é poco omogenea. ,grazie mille in ogni caso per il lavoro! é super utile 

the product is functional, it does its job. aesthetically, however, the surface is not very uniform. ,thank you very much in any case for the work! it's super useful

Gara93

Man i looked for this thing.... it broke on my camera i thought i have to throw it in the trash but with this i fixed it perfectly.

fits so well, thanks :)

huskythedogg

pinballwizard

eniscoinbase

cover

2e9367bf-8a72-4283-9fd6-ee6dde009914.jpg

Screenshot 2025-09-05 160609.png

Screenshot 2025-09-05 160635.png

plate_1.png

0,2 Nozzle,0,08 Layer,4 Walls,15 Infill,Tree Support Bambu Standart,Use biggest Brims on both sides like on the picture&nbsp;&nbsp;

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

&nbsp;Modifizierte Variante eines Batteriedeckels, passend für die Kamera von Fujifilm instax mini 9.Ich habe die ursprüngliche defekte Abdeckung eingescannt und modifiziert. Hierbei wurde der Clip verstärkt der im Gehäuse einrastet, dieser ist bei meinem Gerät auch abgebrochen.&nbsp;Es sind sowohl die Ursprüngliche Scann Datei als auch die Modifizierung als STL angehängt.&nbsp;Ich empfehle für den Druck eine 0.2 Düse zu verwenden. Es sollte auch mit einer 0.4 Düse möglich sein aber für das beste Ergebnis würde ich zur 0.2 Düse greifen. Ebenfalls ist es notwendig Brims zu verwenden wie auf dem Bild zu sehen ist.&nbsp;Ich habe den Mechanismus nun einige Male getestet und er rastet schön ein und wird nicht beschädigt.Allerdings gehört mir die Kamera nicht und ich kann keine Langzeitversuche starten.Daher wäre ich über Feedback sehr erfreut.&nbsp;&nbsp;

&nbsp;Modified variant of a battery cover, suitable for the Fujifilm instax mini 9 cameraI scanned and modified the original defective coverThe clip that snaps into the housing was reinforced, this also broke off on my device&nbsp;Both the original scan file and the modification are attached as STL&nbsp;I recommend using a 0.2 nozzle for printing It should also be possible with a 0.4 nozzle but for the best result I would opt for the 0.2 nozzle It is also necessary to use brims as shown in the picture&nbsp;I have now tested the mechanism several times and it snaps in nicely and is not damagedHowever the camera does not belong to me and I cannot start long-term testsTherefore I would be very happy about feedback&nbsp;&nbsp;

Print Profile(1)

Bill of Materials

Description

Comment & Rating (12)

License