Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 2 walls, 8% infill
Designer
9.8 h
1 plate
Open in Bambu Studio
Boost
1316
3103
101
56
1.5 k
699
Released
Description
Can holder in the shape of the Werewolf
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, Automatic Tree supports (at least 28°), blocked supports inside the mouth (pic).
Or just use my profile:)
If you want to have the handle on the opposite side, just right-click on the object in the slicer and put mirror by the Y axis.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
Happy printing:)
Comment & Rating (101)