Boat Drain Plug Keychain Wrench EDC (1/2" NTP)
Print Profile(1)
Description
My neighbor asked me to make him a keychain wrench for his boats drain plugs (½" NTP square head), so I created a keychain wrench that prints without supports, and is strong enough to function as a wrench, while being small enough to fit on your keychain and in your pocket.
Features:
- Can be used to insert and remove ½" NTP square head boat drain plugs
- Small Pocketable size
- No Supports Needed
Print Profile Notes:
Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 4 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.16mm default for smooth surface)
Infill: 50% gyroid for PETG, 90% gyroid for the first 5mm of the part
Brim: None on textured build plate. Consider brim for smooth PEI plate.
Color: Any
Material: PLA, PETG
Print Orientation: Print flat surface down on printbed
Supports: None
3d Printers: Should be printable on any printer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)