Crokinole 20s holder - 8 buttons
Print Profile(2)
Description
Boost Me (for free)
You can give me a boost if you want.
This is a 20s holder for Crokinole.
Holds up to 8 buttons with diameter of 1.25in (32mm) and width of 0.38in (9.75mm).
Modeled to fit onto round board rim (30.25 in diameter and 0.25in rim thickness), but can also sit flat on the table.
There is a ridge on the bottom inside so that the buttons don't stick in the tube.
The cut out on the bottom that fits on the board rim is slightly curved, and it's sometimes difficult to tell which way it curves. I added an arrow to the bottom, just make sure that is pointing toward the center of the board and you should be good to go.
You can also check out my buttons holder:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)