Wattson Heirloom “ENERGY READER” from Apex Legends

Hey,

I found the Wattson Heirloom model by 666DOMINGO666 on Thingiverse. 

I loved the model but had a few issues with the printabilty, the main thing was the Main body, which was split in half so it would have been increibly difficult to hide the seam, so I modified it.

You need 10 0.3x4x25mm springs, the stickers I got from etsy from GlynDentStickerShop and I got the original sticker desings from https://zbauman3.github.io/wattson-heirloom/media. The High Voltage sticker I made myself. 

Print the parts for the rod hinge in PETG or ABS, they snap very easy when printed in PLA.

The assembly of the button mecanis is kinda tricky, you have to makes sure all springs are In their correct place and the buttons can be pressed easily. 

For the red cable i used an acctual red cable and glued it in place. 

I used a combination of painting and mulitcolor printing, I think you could print the whole thing in multi color but that would make a lot of waste

If you need any kind of Help feel free to comment and I´ll try to help