[McLaren] McLaren F1 Ultimate Supercar Race Car Le Mans Winner Road Car with Base Display Stand Assembly/Movable Wheels
Print Profile(2)
Description
Boost Me (for free)
If you like this model, please boost it! Your support is my motivation for continuous updates!
【Special Notes for F1 Models】
1. The author has conducted structural printing tests on all models before release. However, the F1 model has a complex structure and requires high printing precision. Newcomers are advised to use the parameters in the slicer directly for printing and not to adjust them arbitrarily to avoid printing failures; experienced players may ignore this reminder.
2. The printing effect of the model is affected by various objective factors such as equipment, filament, and environment. If you encounter problems during printing, you are welcome to contact me through comments or private messages, and I will assist in troubleshooting. Creating is not easy. Please communicate before evaluating and do not give low scores at will; malicious negative reviews will result in being blocked. Thank you for your understanding!
3. All models from the author are tested based on Bambu Lab printers, and the configuration files use Bambu Lab's official slicing software. If you are using other brands of printers, it is recommended to adjust the parameters according to your own equipment's slicing software and preview before printing. Thank you for your cooperation!
4. As multi-color printing becomes the trend, the model is sliced with the H2C multi-nozzle printer by default. For other models, please refer to your own model for slicing preview to check the time and filament consumption.
5. Thank you again for the recognition and support from fellow enthusiasts. I hope to receive your likes and boosts. In 2026, let's unlock more F1 models together!
【Read Before Printing!!! Warm Tips】
It is strongly recommended to print the single-color configuration first before printing the multi-color configuration to test the model structure and slicing effect (Cost of single-color model printing: 64 scale 15g filament, 2 hours. 43 scale 50g filament, 3 hours). After being satisfied with the model's appearance, articulated structure, and slicing effect, then print the multi-color version. Thank you.
Note: Before printing the multi-color configuration file, you can enlarge it according to the complexity of the paint scheme. Preview in the slicing software to check the details and ensure printability.
---------⇪3D Printing Instructions-----------⇩ Product Introduction--------------
The McLaren F1 is not just a supercar; it is the pinnacle of automotive engineering and design.
As the world's first carbon fiber monocoque production car, with its central driving position, three-seat layout, naturally aspirated V12 engine, and status as a Le Mans 24 Hours endurance race winner, it redefined the standard for an "ultimate supercar".
In today's world, swept by turbocharging and electrification, the McLaren F1 is even more precious, representing the automotive industry's purest driving spirit – uncompromising mechanical aesthetics and an ultimate driving experience.
Model Description
- Wheels movable, assembly requires no glue. The front and rear tires are different sizes.
- All wheel hubs for the 1/64 scale cars under this account can be replaced. Browse the homepage to download your preferred wheel hub style.
Dimensions
- 1/53 scale
- 1/64 scale: Simply scale down the entire model by 83.33%.
- Slice file, use minimum printer size settings. You can adjust the number of models printed at once according to your printer size to save time and filament.
FDM printing settings
- The actual model was printed using an A1 mini with a 0.4mm nozzle, 0.12mm layer height, and official PLA. Using equipment, parameters, and filament with higher specifications will yield better results (assembly might be too tight or too loose, which can be addressed by adjusting the XY contour compensation of the components, or by using sanding tools and 409 glue for processing and connection).
- Infill density: 15%. To increase the model's heft, you can adjust the infill density to 100%.
- Supports: A combination of normal and tree supports was used.
- Various livery versions will be released later. Follow the account to stay updated on new releases.
- You can also adjust the printing parameters based on your own printing experience.
Support Removal Instructions
- The model is relatively small, with supports added in key areas. To remove supports, you will need to use sprue cutters and tweezers. Breaking them off by hand will likely cause structural damage, especially to the rearview mirrors and rear wing sections.
- Tip: To ensure successful removal from multi-color models and avoid breakage, you can first print a single-color model for practice to understand the model and support structure, then remove supports from the multi-color model (if breakage occurs, 409 glue can be used for connection).
Single-Color Painting Reference (Printed with White Filament)
- Sanding: (Optional) Sand in the order of 400-600-800 grit.
- Painting: Paint with acrylic colors and brushes (for issues with edge layer texture penetration, you can apply the main color over a large area first, then paint the edges).
- Polishing: Polish with a flannel cloth to give the acrylic paint a glossy finish.
Assembly Instructions
- For long-term stability, the wheels require some force to install, and will be stiff when first rotated. After playing with it a few times, it will become more flexible. See the GIF for wheel installation.
- To facilitate the installation of wheel calipers, a special wheel caliper installation tool was designed and created. Link: 1/64 Scale Wheel Caliper Installation Tool by SAMPAN Replica - MakerWorld
Visit the author's homepage to see all vehicle models, welcome to like and follow!
Hope to see more friends share your printing photos, I'm curious what kind of works you will print!
We will continue to release various high-precision 3D printed vehicles, thank you for your attention and support!
Membership
China site:https://makerworld.com.cn/zh/@sampan1120
International site:https://makerworld.com/zh/@sampan1120
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)